Enzymatic degradation of highly phenolic lignin-based polymers (lignophenols)

Enzymatic degradation of two lignin-based polymers (lignophenols), lignocatechol and lignocresol, prepared by selectively grafting catechol and p-cresol to C_α positions of lignin, respectively, were carried out in aqueous organic solvents. Both lignophenols showed high reactivity in the peroxidase-catalyzed oxidation. Structural analyses by NMR spectroscopies revealed that the degraded lignophenols contained aliphatic chain content, which might be mainly formed in the reduction of the intermediate initially generated by the aromatic ring cleavage. Lower amount of aromatic units in the lignophenols after degraded by peroxidase also indicted the cleavage of aromatic rings. Due to the substitution of phenols at C_α positions of lignin, the degraded lignophenols did not have carbonyl structure, which was abundant in the biodegradation products of native lignin. The two lignophenols were also degraded by Rhus vernicifera laccase. But the degree of degradation was lower than that of the degradation by peroxidase, which might be due to the low activity of laccase on the lignin moieties in lignophenols.     

苯酚羟化反应中焦油的分离与分析

利用高速离心、减压蒸馏和萃取等方法分离和定量分析苯酚催化羟化反应中所产生的副产物焦油,讨论各种方法的特点.使用萃取方法系统地考察了各种条件下,以Cu2(OH)PO4为催化剂时苯酚羟化反应体系中焦油的生成量.     

介孔铁铝/蒙脱土复合材料：解离柱撑制备、结构及催化羟基化性能

利用极稀悬浮液中蒙脱土的解离作用并结合柱化技术过程，制备了介孔结构的铝铁/蒙脱土复合材料(Fe-Al/mmt)；并采用粉末X射线衍射、氮等温吸脱附、傅立叶红外光谱、紫外可见光漫反射光谱及苯酚催化羟基化反应表征了其结构和性能。结果显示，铁铝聚合前驱液中铁/铝比影响复合材料中蒙脱土的解离程度，且仅当低铁/铝比时(即Fe/(Fe+Al)物质的量的比介于0.05～0.3)，嵌入解离的蒙脱土片层间的混合铁铝物种呈现能耐温350 ℃的热稳定性；氮等温吸脱附分析反映出这种解离的蒙脱土堆积结构呈现介孔特征，孔径分布窄，介于2.0～2.3 nm；红外分析表明材料表面具有L酸和B酸位，并且L酸位量与嵌入解离的蒙脱土结构中的混合铁铝物种相关；由于结构中混合铁铝物种的存在及相应的Si-O → Fe、Al-O → Fe间的电子跃迁，Fe-Al/mmt材料在紫外区呈现宽泛的能量吸收特征。这些结果说明，由于混合铁铝物种嵌入于解离的蒙脱土片层堆积结构中，形成了“卡片屋”式介孔结构。实验条件下，Fe/(Fe+Al)物质的量的比为0.3的Fe-Al/mmt呈现较佳的催化羟基化性能，苯酚转化率为36.7%，二酚产物选择性32.3%；并且初步表明铝掺杂后，通过铁铝比和表面酸性的调整，材料的部分选择氧化性能可以得到改善。     

Gel permeation chromatographic characterization of sodium hyaluronate and its fractions prepared by ultrasonic degradation

Summary High-molecular-weight sodium hyaluronate isolated from rooster combs was degraded by ultrasonication. The molecular weight of hyaluronate and its polydispersity was determined by gel-permeation chromatography. During 75-min treatment the molecular weight value decreased from 1.39×10⁶ Da to 2.25×10⁵ Da while the polydispersity of the molecular weight increased from 1.29 to 2.36. The reciprocal value of the square of the hyaluronate's molecular weight was linearly proportional to the time of ultrasonication.     

Size exclusion chromatographic characterization of sodium hyaluronate fractions prepared by high energetic sonication

Summary A high molecular weight sodium hyaluronate isolated from rooster combs was degraded by ultrasonication. High-performance size exclusion chromatography allowed rapid and accurate determination of molecular weight parameters (M_z, M_w, M_n) and distributions. The time dependence of hyaluronan ultrasonication to the molecular characteristics of the polymer was investigated. A non-random nature of the degradation process was demonstrated and the reciprocal M_n value was found to be linearly proportional to the time of ultrasonication.     

芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.     

Thermal degradation of wood treated with guanidine compounds in air: Flammability study

Wood has been treated with guanidine phosphate, guanidine nitrate, guanidine carbonate and guanidine chloride to impart flame retardancy. The samples were subjected to differential thermal analysis (DTA) and thermogravimetry (TG) from ambient temperature to 800°C in air to study their thermal behaviors. From the resulting data, kinetic parameters for different stages of thermal degradation were obtained following the method of Broido. For the decomposition of wood and flame retardant wood, the activation energy was found to decrease from 116 to 54 kJ mol^–1; the char yield was found to increase from 5.6 to 34.9%, LOI from 18 to 41.5, which indicated that the flame retardancy of treated wood was improved. Effects of the different compounds on the degradation and flammability of wood have also been proposed.This revised version was published online in November 2005 with corrections to the Cover Date.     

H2O2络合凝胶法制备纳米TiO2/SiO2复合催化剂及其光催化性能

采用H2O2络合凝胶法获得钛的络合物[TiO(H2O2)]2 水溶胶,并与SiO2水溶胶包覆复合,制备了纳米TiO2/SiO2复合半导体催化剂,其结构经XRD和BET表征。以含阳离子艳红染料模拟废水降解为模型反应,考察了复合催化剂的光催化性能。实验结果表明:经650℃焙烧后的复合催化剂中TiO2粒径为9.8 nm,光催化活性最好,SiO2的最佳掺杂量为25%。     

可控降解超支化聚碳硅氮烷的合成与表征

通过锂化四甲基二乙烯基二硅氮烷分别与甲基氢二氯硅烷和二甲基氢氯硅烷的亲核取代反应合成了AB4和AB2型单体AB4M和AB2M,两种单体通过Karstedt催化剂催化的硅氢加成反应分别生成聚碳硅氮烷PAB4M和PAB2M.单体和聚合物的结构通过FT-IR、1H-NMR、13C-NMR、29Si-NMR和体积排除色谱-多角度激光光散射联用(SEC-MALLS)技术进行了表征,结果表明,单体的结构与设计结构相符合;单体聚合时主要以α-硅氢加成方式为主;聚合物具有超支化结构并由N(Si—C)3链节和大量端基双键组成.PAB4M和PAB2M的重均分子量分别为7800和5860g/mol,分子量分布系数分别为2·54和2·31·对PAB4M稳定性的初步研究表明,该聚合物对氯硅烷和在中性条件下对水稳定,但在HCl水溶液中可以降解,且通过控制HCl浓度可以调节其降解速度,从而实现对其控制降解.     

聚乙烯塑料在连续超临界水反应器中的油化研究

在连续超临界水（SCW）反应器中考察了反应温度、停留时间和反应压力对聚乙烯（PE）降解油化的影响。实验结果表明，在120s、25MPa下，从500℃提高到550℃，液体收率呈现先升后降的趋势，在530℃达到最大值（79%）；在520℃、25MPa下，随停留时间的延长，PE裂解程度加深，产物轻质化程度提高，导致液体收率降低，停留240s时，气体收率达到43%；反应压力对产物收率的影响较小，气、液产物中烯/烷比随反应压力的增加而增大。